A narrow-frame antenna for WWAN/LTE/WiMAX/WLAN mobile phones

In this paper, we present a novel narrow-frame antenna with a size of 75 × 8 × 5.8 mm³ for 5.7 in. mobile phones. The antenna mainly consists of a monopole with four branches that are coupled to a two-branch grounded strip. Our antenna is able to cover more bands than other narrow-frame antennas by excitation of several resonant modes. The improved range of the antenna covers the following eleven bands: LTE700, GSM850, GSM900, DCS, PCS, UMTS, LTE2300, LTE2500, LTE3400 (3400–3800 MHz)/WiMAX3.5 GHz (3400–3650 MHz), WLAN5.2 GHz (5150–5350 MHz) and WLAN5.8 GHz (5725–5875 MHz). Another advantage of the proposed antenna is that it does not need any lumped element to match the antenna. The working principles of the proposed antenna are thoroughly studied. A prototype of the proposed antenna is fabricated and measured, with the results in good agreement with the simulation results.     

Optimal inspection for randomly triggered hidden deterioration processes

This paper deals with degradation processes whose onset is triggered at a random time and which stay hidden until they are discovered through inspection or when they begin to show symptoms. This is applicable in many healthcare and industrial scenarios, for example, in the modeling of breast cancer or termite infestation. In our model, we assume that symptoms appear after hitting a random critical threshold and that inspections may have a sensitivity less than one as well as a nonzero false positive rate. The expected cost of repair is derived, and the inspection rate is optimized for a cycle (which lasts from degradation-free to repaired state). This gives results for three cases: the first is for a finite observation period with no degradation recurrence, the second for infinite time horizon allowing recurrence. In the third case, we derive an upper bound for the expected cost in a given constant time period. Finally, the model is applied to determine the optimal strategy for breast cancer screening with regard to the effects of different parametrizations.     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

Lewis acid-oxygen vacancy interfacial synergistic catalysis over SO42−/Ce0.84Zr0.16O2–WO3–ZrO2 for N,N-diethylation of aniline with ethanol

Herein, a new mechanism involving Lewis acid-oxygen vacancy interfacial synergistic catalysis for aniline N,N-diethylation with ethanol was proposed, and the SO₄²⁻/Ce_0.84Zr_0.16O₂–WO₃–ZrO₂ catalyst (SCWZ) with both Lewis acid sites and oxygen vacancies was synthesized by the hydrothermal method, which shows better catalytic activity than the reported solid acidic catalysts. Besides, the SO₄²⁻/ZrO₂ (SZ) and SO₄²⁻/WO₃–ZrO₂ (SWZ) catalysts were also prepared and compared with SCWZ to investigate the synergistic effect of each component. The SO₄²⁻ and WO₃ mainly generate Lewis acid by bonding with ZrO₂, which is beneficial for the fracture of the N–H bond in aniline. The Ce_0.84Zr_0.16O₂ solid solution mainly plays a vital role in generating the oxygen vacancies as the interface active species, which can participate in stripping –OH from ethanol, then the carbocation will also be released, which only needs 1.3805 kcal/mol energy, calculated by density functional theory (DFT), to be input. In comparison, the traditional reaction mechanism needs the Brønsted acidic sites to promote the protonation of ethanol, then dehydration and subsequent formation of carbocation followed, and 108.6846 kcal/mol energy needs to be input, which is far higher than that of the new mechanism. The apparent activation energy (E_a) over SCWZ was measured by experiment to be 34.09 kJ/mol, which is much lower than that of SWZ (47.10 kJ/mol) and SZ (54.37 kJ/mol), illustrating comparatively preferable kinetics for SCWZ than that of SWZ and SZ. Besides, the conversion of aniline and selectivity to N,N-diethylaniline over SCWZ reach almost 100% and 73%, respectively. The SCWZ can be renewed for 4 times without rapid deactivation, and the longevity of SCWZ is longer than that of SWZ and SZ, as the loaded SO₄²⁻ and tetragonal ZrO₂ are stabilized by Ce_0.84Zr_0.16O₂ and WO₃, respectively.     

紫金山东南矿段成矿期次、阶段浅析

通过对紫金山东南矿段铜钼(金)矿床地质矿化特征分析,指出铜钼矿化带主要赋存于花岗闪长斑岩的内外接触带,处于似斑状花岗闪长斑岩的上部,金矿化带赋存在表生氧化带的英安玢岩、隐爆角砾岩中。经过对矿石的组构特征、矿物生成顺序等特征分析,将矿床的成矿演化过程分为斑岩热液期、高硫化浅成低温热液期、表生氧化期三个主要矿化期次,进一步将斑岩热液期分为黑云母-钾长石化阶段、石英-绢云母化阶段、碳酸盐化阶段三个阶段;高硫化浅成低温热液期分为地开石化阶段、明矾石化阶段、硅化阶段三个阶段。研究结果为进一步研究矿床成因提供了依据。     

基于光纤光栅传感的低功耗小型化电网智能感知系统

文章针对监测装置现场取电难的问题,为智能电网盲区和多事态区监测提供解决方案。本研究设计并实现了一种可用于电网智能感知的光纤光栅传感系统,由多参量的光纤光栅传感器和解调仪组成,该解调仪采用可调谐激光器作激发光源,以20×70×90 mm的微型体积,实现2 W的低功耗。系统解调仪最多可容纳4通道光纤光栅传感器,重量小于500 g,分辨率为0.5 pm,精度±2 pm,测量频率可达100 Hz,光信息可通过电力通讯光缆传输,满足多数电网设备监测需求。该传感系统功耗低、体积小,可实现多参量监测,完全满足智能电网现场供电和通讯难、事态多发的监测需求。     

水平衡法与高温转化法在矿泉水氢氧稳定同位素测定中的应用

为了鉴别不同品牌矿泉水标注水源地信息真伪,对11种不同品牌饮用水的氢氧稳定同位素(δD和δ18 O)进行测定。结果表明,水平衡法(GasBench-IRMS)和高温转化法(TC/EA-IRMS)的测定结果一致性较好,两种方法测定6种不同饮用水的δD和δ18 O的平均差异分别为(0.6±1.59)‰和(0.02±0.13)‰。水平衡法需要较长的制备和测定时间,但δD和δ18 O的测定精度明显优于高温转化法。11种饮用水δD和δ18 O变化范围较大,其δD和δ18 O受不同品牌饮用水的水源地降水影响形成明显的地域性。虽然无法区分矿泉水是否由其他类别饮用水伪造,但δD和δ18 O可以为特定区域(如高海拔与沿海地区)以及产地相近的矿泉水水源地鉴别提供依据。     

Numerical evaluation and the effects of geometrical and operational parameters on thermal performance of the shell and double coil tube heat exchanger

Heat exchangers are extensively used in various industries. In this study, the impact of geometric and flow parameters on the performance of a shell and double helical coil heat exchanger is studied numerically. The investigated geometric parameters include external coil pitch, internal coil pitch, internal coil diameter, and coil diameter. The influences of considered geometrical parameters are analyzed on the output temperature of the hot and cold fluid, convective heat transfer coefficient, pressure drop, and average Nusselt number. Water is considered as working fluid in both shell and tube. As an innovation, double helical coils are used instead of one in the heat exchanger. To compare the obtained results accurately, in each section, the heat transfer area (coil outer surface) is kept constant in all models. The results show that the geometrical parameters of double helical coils significantly affect the heat transfer rate.